Skip to main content

Microlyte® Matrix

Microlyte® Matrixis a sterile, single-use absorbent polymeric matrix composed primarily of bioresorbable polyvinyl alcohol with a polymeric surface coating containing ionic and metallic silver.

Imbed Biosciences, Inc.

Imbed Biosciences is a privately held medical device company developing next-generation medical devices for the management of burns, chronic ulcers, gastrointestinal defects, and soft-tissue repair.
Website: www.imbedbio.com
Benefits

• Absorbs wound fluid and transforms into a soft, bioresorbable material that intimately contours to the underlying wound bed
• Contains antimicrobial silver which kills bacteria in contact with the matrix
• Low residual toxicity compared to other antimicrobial matrices
• Transparent

Indications

Under the supervision of a health care professional, Microlyte® Matrix may be used for the management of:
• Wounds
• Partial- and full-thickness wounds including pressure injuries, venous stasis ulcers, diabetic ulcers, first- and second-degree burns, abrasions and lacerations, donor sites, and surgical wounds
• May be used over debrided and grafted partial-thickness wounds

Contraindications

Do not use on individuals who are sensitive to silver or who have had an allergic reaction to Microlyte® Matrix or one of its components.

Warnings and Precautions

• Warning: Frequent or prolonged use of this product may result in permanent discoloration of skin
• Warning: Avoid use with iodophore containing products that may reduce the effectiveness of silver in the dressing
• The wound should be inspected during cover dressing changes. Consult a health care professional if you see (a) signs of infection (increased pain, increased redness, wound drainage), (b) bleeding, (c) a change in wound color and/or odor, (d) irritation (increased redness and/or inflammation), (e) maceration (skin whitening), (f) hyper-granulation (excessive tissue formation), (g) sensitivity (allergic reaction), (h) no signs of healing
• Microlyte® Matrix should not be used with other wound care products other than those listed in the “Directions For Use” section without first consulting a health care professional
• This product contains <0.5 mg/in2 polyethylene glycol (400 Da)

Storage Requirements

Store at room temperature (15°C-30°C, 59°F-86°F). Keep dry. If further information is needed, please contact Imbed Biosciences, Inc.

Active Ingredients

Ionic and metallic silver

Inactive Ingredients

Polyvinyl alcohol (99%), proprietary polyvinyl electrolytes (<1%)

How Supplied/Sizing
5cmx5cm, 10cmx10cm.
HCPCS Code
Product features
cancel Biosynthetic
cancel Biosynthetic - animal-based
cancel Indicated for chronic vascular ulcers
check_circle Indicated for diabetic ulcers
cancel Indicated for draining wounds
check_circle Indicated for partial- and full-thickness wounds
check_circle Indicated for pressure ulcers
check_circle Indicated for surgical wounds
cancel Indicated for third-degree burns
check_circle Indicated for trauma wounds
check_circle Indicated for venous ulcers
check_circle Synthetic
check_circle Variety of sizes
cancel Resorbable
cancel Contact manufacturer for usage guidelines
Other features
check_circle Educational Material Available
check_circle Free Samples/Trials Available
check_circle Published Clinical Article Available
Recommended Use

Acute Wounds
Burns
Deep Wounds
Dehisced Wounds
Infected Wounds
Surgical Wounds
Traumatic Wounds

Mode of Use/Application

Clean the wound area using sterile saline solution. If the wound is dry, moisten it with sterile saline and remove excess saline with sterile gauze. Avoid contact with wet surfaces until placed on a moist wound bed. Cut Microlyte® Matrix to size slightly larger than the wound. Multiple sheets can be used to tile the entire wound area. Apply Microlyte® Matrix directly to wound bed. When placed on a moist wound bed, the dressing forms a soft conforming sheet. Microlyte® Matrix should be used with a secondary cover dressing. Cover with a moisture retentive dressing such as a film dressing, foam dressing, wet-to-dry gauze, or other appropriate dressing. See individual cover dressing package inserts for complete instructions for use. All dressing site areas should be inspected daily.

Removal & Change Frequency

Reapply Microlyte® Matrix daily or up to every 3 days, depending on the wound and the healing progression, or when clinically indicated (eg, leakage, excessive bleeding, increased pain).
To reapply, carefully remove the secondary cover dressing. Gently irrigate wound with sterile saline to remove necrotic tissue. It is not necessary to remove any residual Microlyte® Matrix observed during secondary cover dressing changes.
Change the secondary cover dressing as needed or when Microlyte® Matrix is re-applied. Duration of treatment depends on wound type and healing conditions.

No posters match your selected filters. Remove some filtres, or reset them and start again.

Have a product to submit?

Be included in the most comprehensive wound care products directory
and online database.
Learn More