GEMCORE360°™ Hydrocolloid Film Backed Dressings is a sterile, self-adhesive wound dressing that consist of a thin absorbent wound contact layer of hydrocolloid with a backing layer of semipermeable, low-friction, waterproof polyurethane film, which also provides a bacterial barrier.
• Conformable hydrocolloid adhesive with the ability to absorb wound exudate
• The wound contact layer is laminated to a breathable polyurethane backed foam
• Effective fluid handling
• The breathable foam allows moisture to be transported from the wound
• Helps reduce dressing changes and provides increased wear time (up to five days)
• Can promote autolytic debridement of slough and necrotic tissue while promoting granulation
• Waterproof and bacterial barrier protects from cross contamination
• Keeps bacteria and other contaminants away from the wound
• Allows the patient to wash or shower
GEMCORE360°™ Hydrocolloid Film Backed Dressing is indicated for the following light to moderately exuding chronic and acute wounds; pressure injuries, leg and foot ulcers, diabetic ulcers, skin grafts and donor sites, lacerations, abrasions, post-operative surgical wounds and first- and second-degree burns.
GEMCORE360°™ Hydrocolloid Film Backed Dressing is suitable for use under compression bandages and for use with cavity wounds as a secondary dressing.
GEMCORE360°™ Hydrocolloid Film Backed Dressing is not indicated for use on individuals with a known sensitivity to hydrocolloids.
Not for surgical implantation.
Do not reuse in whole or in part, as it may compromise sterility and/or the performance of the dressing.
GEMCORE360°™ Hydrocolloid Film Backed Dressing must not be ingested and must be kept away from children and animals.
For use under the guidance of a health care professional.
Store at room temperature (10°C-25°C, 50°F-77°F). Keep dry. Avoid storage in direct sunlight.
|Antimicrobial format available|
|Conforms readily to wound||●|
|Gels on contact w/ exudate||●|
|Impermeable to outside contaminants||●|
|Variety of sizes||●|
|Educational Material Available||●|
|Free Samples/Trials Available||●|
|Published Clinical Article Available|
Non/Minimally Exudating Wounds
Irrigate the wound site in accordance with standard protocols if necessary and dry the surrounding skin before applying dressing.
Select a size of GEMCORE360°™ Hydrocolloid Film Backed Dressing that extends beyond the wound site by at least 2cm.
Gently warm the dressing prior to application, this will help ensure adhesion of the dressing to the patient's skin.
Apply by smoothing the dressing across the wound to ensure that it adheres correctly to the intact skin.
GEMCORE360°™ Hydrocolloid Film Backed Dressing can remain in situ up to five days, dependent on patient condition and the level of exudate. GEMCORE360°™ Hydrocolloid Film Backed Dressing should be changed whenever good wound care practice dictates.
To remove the dressing, press down on the skin with one hand and carefully lift the edge of the dressing with the other hand. If the dressing is not easily removed, moisten with sterile saline solution prior to removal. Dispose of according to local procedures and guidelines.
If required, cleanse the wound site prior to application of a new dressing.
May be left in place for up to five days.