Printer-friendly version
GEMCORE360°™ PHMB Antimicrobial Silicone Border Foam Dressings consist of a sterile, high performance foam impregnated with polyhexamethylene biguanide (PHMB) and an effective broad-spectrum antimicrobial which has rapid microbial action within 24 hours.
• Kills a broad spectrum of bacteria
• Antimicrobial action on MRSA, MRSE, VRE, Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Candida albicans and Rhodotorula mucilaginosa
• Resists bacterial colonization and reduces bacterial penetration within the dressing
• Proven to perform without negatively impacting epithelialization
• Excellent absorption rate and promotes healing through a moist wound environment
• Reduces the risk of maceration
• Sustained antimicrobial release and effectiveness for up to seven days
• Waterproof top-sheet with high moisture vapor transmission rate to help reduce friction and shear
• Soft and conformable and easy on the skin
GEMCORE360°™ PHMB Antimicrobial Silicone Border Foam Dressings are indicated for use in the management of post-surgical incisions, pressure injuries, venous stasis ulcers, diabetic ulcers, donor sites, abrasions, lacerations, first- and second-degree burns, dermatologic disorders, other wounds inflicted by trauma and as a secondary dressing or cover dressing for packed wounds.
GEMCORE360°™ PHMB Antimicrobial Silicone Border Foam Dressings are not indicated for use on the following:
• Dry or lightly exuding wounds
• Surgical implantation
• Individuals with a known sensitivity to polyurethane films, foams, acrylic adhesive or PHMB
Do not surgically implant.
Dressings are not intended as a treatment for infections; if clinical signs of infection are present, please consult a physician.
Not intended for third-degree burns.
Do not use on patients with known sensitivity to any components of the dressing.
Do not use with oxidizing solutions such as hypochlorite or hydrogen peroxide, as these can break down the absorbent polyurethane component of the dressing and can also break down the PHMB.
For use by, or under the guidance of, health care professionals only.
Do not ingest; keep away from children and animals.
Do not use if primary packaging is damaged.
Do not resterilize.
Single use only.
Do not reuse in whole or in part, as it may compromise sterility and/or the performance of the dressing.
Store at room temperature (10⁰C-25⁰C, 50⁰F-77⁰F). Keep dry.
Polyhexamethylene biguanide (PHMB)
| Absorptive dressing format | |
| Alginate dressing format | |
| Antimicrobial effects up to 48 hours | |
| Antimicrobial effects up to 3 days | |
| Antimicrobial effects up to 7 days | ● |
| Bacterial binding | |
| Bacterial trapping | |
| Bactericidal | ● |
| Bactericidal broad-spectrum | ● |
| Bacteriostatic | ● |
| Collagen dressing format | |
| Composite dressing format | |
| Contact layer dressing format | |
| Foam dressing format | ● |
| Fungicidal | |
| Gauze or non-woven dressing format | |
| Gelling fiber dressing format | |
| Hydrogel (amorphous) dressing format | |
| Hydrogel (impregnated) dressing format | |
| Hydrogel (sheet) dressing format | |
| Impermeable to outside contaminants | |
| Impregnated dressing format | |
| Microbicidal | |
| Moisture vapor permeable | ● |
| Secondary dressing required | |
| Silicone-based adhesive | |
| Sporicidal | |
| Super absorbent polymers | |
| Sustained release formula | ● |
| Transparent film dressing format | |
| Virucidal | |
| Wound filler dressing format |
| Educational Material Available | ● |
| Free Samples/Trials Available | ● |
| Published Clinical Article Available |
Acute Wounds
Burns
Chronic Wounds
Diabetic Foot
Granulating/Epithelializing Wounds
Infected Wounds
Moderate/Highly Exudating Wounds
Pressure Ulcers
Sloughy Wounds
Surgical Wounds
Venous Ulcers
If necessary, cleanse the wound area with a non-toxic cleansing solution (i.e., saline). Dry the surrounding areas of the wound thoroughly before dressing application.
Select a size of GEMCORE360°™ PHMB Antimicrobial Silicone Border Foam Dressing where the foam pad is slightly larger than the wound.
The foam pad size should be such that it extends well beyond the open wound at (least 0.75" or 2cm) in all directions.
Remove the release liners from the wound dressing and avoid touching the central part of the dressing that will be placed directly onto the wound.
Center the dressing on the wound and apply it gently to the wound site. Press the dressing on the surrounding skin by gentle application of pressure.
The dressing can be repositioned during application and lifted for observations during wear time if necessary.
The GEMCORE360°™ PHMB Antimicrobial Silicone Border Foam Dressing can remain in situ for up to seven days, dependent on patient condition and the level of exudate. Initially it may be necessary to change the dressing every 24 hours or whenever good wound care practice dictates. Duration of product use is not recommended for longer than 30 days.
Gently remove the dressing from the wound bed and dispose of according to local procedures and guidelines.
If required, cleanse the wound site with a suitable wound cleanser prior to application of a new dressing.
May be left in place for up to seven days.
GEMCO Medical is a leading accredited wholesale medical supply distributor and third-party logistics provider of diabetes supplies and other medical products.