GEMCORE360°™ PHMB Non-Border, Non-Adhesive Antimicrobial Foams consist of a sterile, high performance foam impregnated with polyhexamethylene biguanide (PHMB), a highly effective broad-spectrum antimicrobial which has rapid microbial action within 24 hours.
• Kills a broad spectrum of bacteria
• Antimicrobial action on MRSA, MRSE, VRE, Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Candida albicans and Rhodotorula mucilaginosa
• Resists bacterial colonization and reduces bacterial penetration within the dressing
• Proven to perform without negatively impacting epithelialization
• Excellent absorption rate and promotes healing through a moist wound environment
• Reduces the risk of maceration
• Sustained antimicrobial release and effectiveness for up to seven days
• Waterproof top-sheet with high moisture vapor transmission rate to help reduce friction and shear
• Soft and conformable and easy on the skin
GEMCORE360°™ PHMB Non-Border, Non-Adhesive Antimicrobial Foam is indicated for use in the management of post-surgical incisions, pressure injuries, venous stasis ulcers, diabetic ulcers, donor sites, abrasions, lacerations, first- and second-degree burns, dermatologic disorders, other wounds inflicted by trauma and as a secondary dressing or cover dressing for packed wounds.
GEMCORE360°™ PHMB Non-Border, Non-Adhesive Antimicrobial Foams are not indicated for use on the following:
• Dry or lightly exuding wounds
• Surgical implantation
• Individuals with a known sensitivity to polyurethane films, foams, acrylic adhesive or PHMB
Do not surgically implant.
Dressings are not intended as a treatment for infections; if clinical signs of infection are present, please consult a physician.
Not intended for third-degree burns.
Do not use on patients with known sensitivity to any components of the dressing.
Do not use with oxidizing solutions, such as hypochlorite or hydrogen peroxide, as these can break down the absorbent polyurethane component of the dressing and can also break down the PHMB.
For use by, or under the guidance of, health care professionals only.
Do not ingest; keep away from children and animals.
Do not use if primary packaging is damaged.
Do not resterilize.
Single use only.
Do not reuse in whole or in part, as it may compromise sterility and/or the performance of the dressing.
Store at room temperature (10°C-25°C, 50°F-77°F). Keep dry.
Polyhexamethylene biguanide (PHMB)
|Absorptive dressing format|
|Alginate dressing format|
|Antimicrobial effects up to 48 hours|
|Antimicrobial effects up to 3 days|
|Antimicrobial effects up to 7 days||●|
|Collagen dressing format|
|Composite dressing format|
|Contact layer dressing format|
|Foam dressing format||●|
|Gauze or non-woven dressing format|
|Gelling fiber dressing format|
|Hydrogel (amorphous) dressing format|
|Hydrogel (impregnated) dressing format|
|Hydrogel (sheet) dressing format|
|Impermeable to outside contaminants|
|Impregnated dressing format|
|Moisture vapor permeable||●|
|Secondary dressing required|
|Super absorbent polymers|
|Sustained release formula||●|
|Transparent film dressing format|
|Wound filler dressing format|
|Educational Material Available|
|Free Samples/Trials Available||●|
|Published Clinical Article Available||●|
Moderate/Highly Exudating Wounds
If necessary, cleanse the wound area with a non-toxic cleansing solution (i.e., saline). Dry the surrounding areas of the wound thoroughly before dressing application.
Select a size of GEMCORE360°™ PHMB Non-Border, Non-Adhesive Antimicrobial Foams where the foam pad is slightly larger than the wound. If necessary, the dressing can be cut (using sterile scissors) to the wound size.
Center the dressing on the wound, ensuring the pink side is facing away from the wound and apply it gently to the wound site.
Fix the dressing in place with a suitable tape to ensure the dressing remains in position. Ensure the tape is applied to the edges only and does not cover the dressing, as this may affect its performance. Alternatively, if being used under compression bandaging, tape is not required as the bandaging will hold the dressing in situ.
Discard any remaining dressing material, due to the risk of contamination.
The GEMCORE360°™ PHMB Non-Border, Non-Adhesive Antimicrobial Foam can remain in situ for up to seven days, dependent on patient condition and the level of exudate. Initially, it may be necessary to change the dressing every 24 hours or whenever good wound care practice dictates. Duration of product use is not recommended for longer than 30 days. Do not exceed a maximum of 12 dressing changes for adults or six dressing changes for children/neonates during 30 days of product use.
Gently remove the dressing from the wound bed and dispose of according to local procedures and guidelines.
If required, cleanse the wound site with a suitable wound cleanser prior to application of a new dressing.
May be left in place for up to seven days.
GEMCO Medical is a leading accredited wholesale medical supply distributor and third-party logistics provider of diabetes supplies and other medical products.