Gold Dust™
Printer-friendly version
Gold Dust™ hydrophilic polymer wound filler is an exceptionally high absorber. Absorbs 100 times its own weight (300ml). Easy to apply and remove from wound.
• Protects wound tissue and the surrounding periwound area from maceration and degradation
• Helps reduce dressing changes
• Highly absorbent
Not recommended for non-draining wounds. Consult a physician if signs of infection such as fever, swelling or pain occur.
When managing moderate to low exudating wounds, one must pre-moisten the Gold Dust™ granules to form a gel to avoid over-drying the tissue.
Polymer
| Antimicrobial format available | |
| Clear | |
| Compatible w/ topicals | |
| Conforms readily to wound | |
| Limited shelf life | |
| Moisture vapor permeable | ● |
| Powder form | ● |
| Preserved multiple dose | |
| Secondary dressing required | |
| Unpreserved unit dose | |
| Usable on infected wounds | ● |
| Educational Material Available | ● |
| Free Samples/Trials Available | ● |
| Published Clinical Article Available | ● |
Acute Wounds
Cavity Wounds
Chronic Wounds
Deep Wounds
Dehisced Wounds
Diabetic Foot
First- and Second-Degree Burns
Infected Wounds
Moderately/Highly Exudating Wounds
Palliative Wounds
Pressure Ulcers
Sloughy Wounds
Surgical Wounds
Venous Ulcers
For heavily exudating wounds, clean the wound as necessary. Sprinkle a layer of Gold Dust™ to generously cover the wound area. Note: Product will absorb 100 times its own water weight. Therefore, it may not be necessary to use the entire contents of this package. Once the product interacts with the wound exudates, the powder will turn into a gel. Cover the wound with a non-adherent dressing and secure with tape or elastic bandage.
For moderately exudating wounds, clean the wound as necessary. Mix packet contents (3g) into 30cc of water, mix rapidly. Fill the wound cavity with the gel. Cover the wound with a non-adherent dressing and secure with tape or elastic bandage.
Change the dressings daily or when saturated with exudate. Gold Dust™ may be flushed using saline or irrigation system.
It is recommended that the Gold Dust™ be covered with non-adherent wound dressing.
Southwest Technologies, Inc. manufactures advanced wound care, collagen, hot/cold therapy products and pressure relieving devices.
