Jevity® 1.0 Cal is fiber-fortified therapeutic nutrition that provides complete, balanced nutrition for long- or short-term tube feeding.
• 14.4g total dietary fiber/L
• Fiber helps maintain normal bowel function and may be useful in the dietary management of diarrhea and constipation
• Meets or exceeds 100% of the 1995 RDIs for 24 essential vitamins and minerals in 1400 Cal (1321mL)
• Provides protein to help support lean body mass and wound healing
• Suitable for lactose intolerance
Not for IV use.
Not for people with galactosemia.
Store unopened at room temperature; avoid extreme temperatures. Shake well prior to opening. Once opened, reclose or cover, refrigerate and use within 48 hours.
May be used for total or supplemental nutrition.
May be fed at room temperature or chilled.
Follow physician's instructions.
Adjust flow rate and volume according to patient's condition and tolerance.
Feed at room temperature using a feeding pump or syringe.
Additional fluid requirements should be met by giving water between or after feedings or when flushing the tube.
Avoid contamination during preparation and use.
All liquid medical foods, regardless of type of administration system, require careful handling because they can support microbial growth. Follow these instructions for clean technique and proper setup to reduce the potential for microbial contamination.
NOTE: Failure to follow the Instructions for Use increases the potential for microbial contamination and reduces hangtime.
Administer product at room temperature. THOROUGHLY wash hands with soap and water before handling container or feeding set. Turn container upside down and SHAKE VIGOROUSLY, using a twisting motion for at least 10 seconds. DO NOT touch any part of the container or feeding set that comes into contact with the formula. When initiating feeding, follow physician's instructions. Adjust flow rate and volume according to patient's condition and tolerance. Additional fluid requirements should be met by giving water between or after feedings or when flushing the tube.
For Use with Enteral Feeding Pumps:
Remove dust cover from RTH Safety Screw Cap. Remove dust cover from feeding set connector. Insert feeding set connector into port of RTH Safety Screw Cap and completely pierce foil. Turn connector collar clockwise until it is securely fastened. Close clamp on set before inverting container. Invert container and suspend, using hanging ring on bottom of container. Follow directions for use provided by manufacturer of feeding sets. Unless a shorter hang time is specified by the set manufacturer, hang product for up to 48 hours after initial connection when clean technique and only one new set are used. Otherwise hang for no more than 24 hours.
No posters match your selected filters. Remove some filtres, or reset them and start again.