Printer-friendly version
NATROX® Oxygen Wound Therapy is a simple device that continuously generates and delivers a minimum of 15ml/h pure oxygen flow rate (POFR) directly to the wound bed. Battery operated, portable, silent and can be maintained 24/7.
• Continuous pure oxygen flow rate (POFR) of 15ml/h directly to the wound bed
• Active therapy outside a specialist care environment
• 24/7 oxygen therapy
• Unobtrusive: small, lightweight and silent
• Unrestricted mobility
• Comfortable
• Intuitive and easy to use
The NATROX® System is a low-dose tissue oxygenation system intended to provide topical oxygen to aid in the healing of chronic wounds such as: skin ulcerations due to diabetes, venous stasis, post-surgical infections and gangrenous lesions; decubitus ulcers (bedsores); amputations/infected stumps; skin grafts; burns and frostbite.
The NATROX® system is contraindicated for the following: ulcers due to thrombophlebitis; ulcers due to Reynaud's disease; wounds completely covered with eschar; wounds with fistulae or deep sinus tracts where the end cannot be probed; wounds covered with petroleum-based dressings; inadequate perfusion to support healing; ulcers resulting from infections, such as tuberculosis, syphilis, deep fungal infections; bites or third-degree burns.
Always refer to the IFU for the most up to date information.
Disconnect the NATROX® OG device during a shower or bath and keep the ODS dry. NATROX® ODS can be safely reconnected afterwards.
NATROX® OG should not be sterilized, autoclaved or flushed with water or any other fluid.
Do not use if packaging has been previously opened or is damaged.
Some patients can experience increases in exudate which can be a normal response to the use of topical oxygen.
The NATROX® system should be kept dry and stored between 5°C and 40°C (0°F and 85°F). Sterile items should not be opened until ready to use.
| Available in foam dressing format | |
| Blockage alarm system | |
| Continuous oxygen | ● |
| Portable | ● |
| Rechargeable unit | ● |
| Reusable | ● |
| Unit weight < 5oz | ● |
| Unit weight > 5oz |
| Educational Material Available | ● |
| Free Samples/Trials Available | ● |
| Published Clinical Article Available | ● |
Burns
Chronic Wounds
Diabetic Foot
Pressure Ulcers
Surgical Wounds
Venous Ulcers
Gather all supplies such as the NATROX® Oxygen Generator (OG), NATROX® Oxygen Delivery System (ODS) and dressing. Cleanse the wound using normal aseptic technique. Apply the dressing (ODS) and position it centrally. Insert the battery in the NATROX® OG, check the green light is flashing and attach the tube from the ODS. ODS should be changed at every dressing change and at least once a week.
One year warranty on the OG and batteries
NATROX® Device (OG+ Batteries) Size: 4.45"x 2.36"x 0.67" NATROX® Device (OG+ Batteries) weight: 3.8oz
NATROX® ODS Size: 39.37" + 2.12" diameter
NATROX® Holster Kit
Inotec AMD is the manufacturer of NATROX® Oxygen Wound Therapy, an FDA cleared class II medical device that uses the natural properties of oxygen to stimulate wound healing. It designs technologies to improve the quality of life for patients suffering from chronic, hard-to-heal wounds, a problem affecting millions worldwide.