
• Moisture vapor permeable and allows fluid to evaporate rapidly from foam dressing
• Pumping action continuously removes excess exudate and bacteria
• Fewer dressing changes for less wound bed and patient trauma
• May be used under compression and minimizes strikethrough
• Stays intact when exposed to exudate and upon removal
• Inactivates pathogens to reduce risk of infection
• Can be cut to size without unraveling
• Minimizes risk of maceration
• Protects healthy intact skin
ULTRA Silver dressings are indicated for use on partial-thickness burns, incisions, skin grafts, donor sites, lacerations, abrasions, and stage 1-4 dermal ulcers (vascular, venous, pressure, and diabetic).
ULTRA Silver dressings should not be used on patients with a known sensitivity to silver. In case of suspected allergic reaction, discontinue use immediately and contact your health care provider.
ULTRA Silver dressings are not approved for use directly on full-thickness burns. The Active Fluid Management® performance of ULTRA Silver dressings may be impaired by use with petrolatum-based ointments.
ULTRA Silver dressings should be stored at temperatures less than 131˚F. Keep dry.
Absorptive dressing format | |
Alginate dressing format | |
Antimicrobial effects up to 48 hours | |
Antimicrobial effects up to 3 days | |
Antimicrobial effects up to 7 days | |
Bacterial binding | |
Bacterial trapping | |
Bactericidal | |
Bactericidal broad-spectrum | |
Bacteriostatic | |
Collagen dressing format | |
Composite dressing format | |
Contact layer dressing format | |
Foam dressing format | ● |
Fungicidal | |
Gauze or non-woven dressing format | |
Gelling fiber dressing format | |
Hydrogel (amorphous) dressing format | |
Hydrogel (impregnated) dressing format | |
Hydrogel (sheet) dressing format | |
Impermeable to outside contaminants | |
Impregnated dressing format | |
Microbicidal | |
Moisture vapor permeable | ● |
Secondary dressing required | |
Silicone-based adhesive | |
Sporicidal | |
Super absorbent polymers | |
Sustained release formula | |
Transparent film dressing format | |
Virucidal | |
Wound filler dressing format |
Educational Material Available | ● |
Free Samples/Trials Available | ● |
Published Clinical Article Available | ● |
Diabetic Foot
Pressure Ulcers
Superficial Wounds
Surgical Wounds
Venous Ulcers
ULTRA Silver dressings can be used throughout the healing process. Prepare the wound bed according to clinical protocol such as debridement and/or cleaning and rinsing with sterile saline or water. Remove the dressing from the package and apply to the wound with the printed side of the dressing away from the wound. Optimal performance of ULTRA Silver dressings requires direct contact with the wound. ULTRA Silver dressings should not be folded. If required, ULTRA Silver dressings can be cut to various shapes and sizes. ULTRA Silver dressings can be secured with an appropriate dressing such as roll gauze, adhesive border gauze, composite island dressing, transparent film, or tape. ULTRA Silver dressings can be used under compression.
ULTRA Silver dressings should be changed when clinically indicated or as prescribed by a health care professional. Carefully remove the fixative and the dressing from the wound. Normally the dressing does not adhere to the wound. If adherence is observed, the dressing can be moistened with sterile saline or water to ease removal.
Milliken Healthcare Products is the manufacturer of an innovative portfolio of wound and burn care dressings which provide unique value through Active Fluid Management® (AFM®) technology.