VersalVent Model V1
Printer-friendly version
VersalVent is a pneumatically powered, time cycled, volume constant, inspiratory flow adjustable, single circuit that produces a square wave flow pattern and is compatible with either monoplace or multiplace hyperbaric systems.
• 100% pneumatically powered control system (no electricity needed)
• Automatically compensates for consistent volume output with changes in pressure up to 3ATA
• User friendly color coded lines with individualized fittings for 100%
connection accuracy for patient safety
• Wide range adjustable inspiratory flow
• Oxygen flush button for emergent manual ventilation
• Built-in safety pressure relief valve
• Square wave flow pattern output
• Ability to administer air-breaks
• Compatible for use with positive end-expiratory pressure (PEEP)
• Capable of intermittent mandatory ventilation (IMV)
• Custom gas tubing penetrator (custom made to be compatible with most monoplace chambers)
• Fully portable
• Easy to clean and maintain
The Versal Vent Model V1 Hyperbaric Chamber Ventilator is intended and indicated for use with pediatric and adult patients in respiratory failure or any other specific patient breathing requirements, as determined by the attending physician, when the patient is placed inside a hyperbaric chamber for prescribed therapy.
Same as for hyperbaric oxygen therapy and mechanical ventilation.
See user manual for details.
Same as for hyperbaric oxygen therapy and mechanical ventilation.
35°F to 95°F
| Smooth bore penetrations | |
| Indicated for surgical wounds | |
| Indicated for third-degree burns | |
| Indicated for trauma wounds | |
| Indicated for venous ulcers | |
| Locking gurney for transport | |
| Monoplace | ● |
| Multiplace | ● |
| Non-invasive blood pressure penetration | |
| Ventilator feed-through | ● |
| Indicated for partial- and full-thickness wounds | |
| Indicated for pressure ulcers | |
| Provides oxygen to wound under a dressing | |
| Fire suppression system | |
| Attendant accommodation | |
| Dualplace | |
| Built-in patient breathing system |
| Educational Material Available | ● |
| Free Samples/Trials Available | |
| Published Clinical Article Available |
Either multiplace (inside or outside the chamber) or monoplace setting.
Materials: Aluminum, stainless steel, brass and plastic
1 year manufacturer warranty
Extended warranty available for additional cost
Length: 12" (30.48cm)
Width: 8" (20.32cm)
Height: 9" (22.86cm)
Weight: 12lb (5.44kg)
Oxygen inlet pressure requirement: 80psi from dedicated ventilator supply source
Chamber pressurization range: 1ATA to 3ATA
Tidal Volume Range: 0ml to 1.0L at 3ATA
Breaths per minute rage: 5bpm to 40bpm
Minute volume range: 0L to 15L at 3ATA
Inspiratory time rage: 0.5 seconds to 3.5 seconds
Expiratory time rage: 1.0 seconds 5 seconds
I:E range: 1:5 to 3.5:1
Initial inspiratory flow rate: 0L to 100L at 1ATA
Oxygen flush button range: 0 liters per minute to 50 liters per minute
Intermittent mandatory ventilation range: 0 liters per minute to 25 liters per minute
Pressure relief valve range: 0cmH2O to 85cmH2O
Airway pressure gauge range: -10cmH2O to + 100cmH2O
Internal system compliance: 0cmH2O
Operational temperature rage: 35°F to 95°F
Airway pressure gauge, pressure relief valve, patient tubing circuit, tidal volume and exhalation valve input tubing from control module (via penetrator fittings)
Pan-America Hyperbarics specializes in building, selling, and distributing hyperbaric treatment systems and ancillary products. They are the sole agent and exclusive distributor in the North, Central and South America Territories.