HEELIFT® AFO Ultra provides the dependable offloading of a HEELIFT®, the foot drop protection of an AFO and a new breathable, fluid-repellent inner lining. Works right out of the bag for most patients, or can be customized to meet the patient's specific needs.
• Non-slip traction sole
• Low- friction backing
• Semi-rigid construction controls ankle while allowing for limited weight bearing transfers with assistance
• Offloads the heel and other at risk areas where indicated
• Offloads drop foot
• Customizable, anti-rotation wedge included
• Ultra polyester soft suede fluid-repellent inner lining
Consult Instructions for Use (IFU) for complete indications.
Open up the HEELIFT® AFO Ultra. Set the extra pad aside. Keep it available, as you may need it later to further customize the boot. Place the foot inside the boot with the heel positioned above the heel suspension opening. The heel should hang over the bottom elevation pad. Pull the closure straps over the skin towards the D-rings. Thread the straps through the D-rings. Use the hook-and-loop closures to secure the straps. Straps should not touch skin. Leave flaps slightly open to provide added ventilation. Test for the proper fit. You should be able to fit your fingers between the heel opening and the bed. The boot should not move freely on the leg. Consult instructions for Use for complete application and customization information.
Semi-rigid polypropylene splint with Ultra woven polyester lining on an open cell foam boot. Ultra lining is fluid-repellent.
No posters match your selected filters. Remove some filtres, or reset them and start again.